v3.9.77 License & Update Notifications CURRENT VERSION

License management improvements and a new update notification system — in the application and in the Launcher.

🐛 Fix 🆕 New
  • 🐛 Fixed: trial expiry popup appeared even with a valid active license
  • 🐛 Fixed: Launcher showed grace period warning (27 days) even when internet was available
  • 🆕 Update notification in RE Colorizer PRO
  • 🆕 Update notification in the Launcher — displayed on the license screen with a link to the changelog
v3.9.74 Independent Gamma Pipeline

Gamma correction is now a fully independent step in the processing pipeline, always applied to B&W frames before colorization — regardless of whether Pre-Processing or Post-Processing is enabled.

🐛 Fix 🔧 Improved
v3.9.73 Enhanced Color Controls

Major upgrade to the post-processing controls, with more precise color temperature, stronger visual effects, and numeric feedback directly on the sliders.

🆕 New 🔧 Improved ⚡ Performance
  • 🆕 Color Temperature expanded from 3 steps (Cold/Balanced/Warm) to 5 steps (-2 / -1 / 0 / +1 / +2) for finer control
  • 🆕 Gamma and Saturation sliders now display their numeric value in real time (blue label)
  • 🆕 Color Temperature also shows its current value dynamically (-2, -1, 0, +1, +2)
v3.9.70 Workflow Refinement & Preview

Complete redesign of the video tab workflow. The colorization pipeline is now structured in three clearly labelled steps, and the 8-second preview integrates directly into the colorization process.

🆕 New 🔧 Improved 🐛 Fix
  • 🆕 Preview 8 sec. colorisation button — test the colorization on 8 seconds before processing the full video
  • 🆕 ↩ Reload Original Film button — restore original video after a preview test
  • 🆕 Pipeline structured in 3 labelled sections: Pre-Processing / Post-Processing / Final Colorisation
  • 🆕 I'm Lucky button repositioned to the Post-Processing section for better workflow logic
v3.9.63 Test System & Video Info

Introduction of a dedicated test video system and a compact video info display. Users can now preview a short segment before committing to a full colorization run.

🆕 New 🔧 Improved
  • 🆕 Test video generation: extract and colorize an 8-second clip from any start point
  • 🆕 Original video path preserved — always recoverable after a test
  • 🆕 Video Info now compact: Resolution, FPS and Duration on a single line
v3.9.60 Pipeline Restructure & Gamma Control

Major reorganisation of the video tab: the processing pipeline is now presented in logical order (Pre-Processing → Colorisation → Post-Processing). Gamma correction moved to Pre-Processing, and a live B&W preview was added.

🆕 New 🔧 Improved ⚡ Performance
  • 🆕 Preview Pre-Processing button — view the B&W optimised result before colorizing
  • 🆕 Gamma slider moved to Pre-Processing — now acts independently from the Restoration toggle
v3.9.55 Color Temperature & I'm Lucky

Introduction of two major post-processing controls: a Color Temperature slider and the I'm Lucky highlight correction, designed specifically to address the yellow bias common in AI colorization.

🆕 New 🔧 Improved
  • 🆕 Color Temp. slider — adjust from cold to warm tones
  • 🆕 I'm Lucky button — selective LAB highlight correction, reduces yellow/orange bias from DeOldify
  • 🆕 Old Film profile: inline warning label (no popup, no layout shift)

🔭 What's coming next

  • Preset save/load for Post-Processing settings
  • Real-ESRGAN upscaling module (separate add-on)
  • Batch processing for multiple video files
v3.9.77 Licence & Notifications de mise à jour VERSION ACTUELLE

Améliorations de la gestion des licences et nouveau système de notification de mise à jour — dans l'application et dans le Launcher.

🐛 Correction 🆕 Nouveau
  • 🐛 Corrigé : le popup d'expiration du trial s'affichait même avec une licence active valide
  • 🐛 Corrigé : le Launcher affichait l'avertissement de grace period (27 jours) même avec internet disponible
  • 🆕 Notification de mise à jour dans RE Colorizer PRO
  • 🆕 Notification de mise à jour dans le Launcher — affichée sur l'écran de licence avec lien vers le changelog
v3.9.74 Pipeline Gamma indépendant

Le Gamma est désormais une étape entièrement indépendante dans le pipeline, toujours appliqué sur les frames N&B avant la colorisation — que le Pré-traitement ou le Post-traitement soit activé ou non.

v3.9.73 Contrôles couleur renforcés

Mise à jour majeure des contrôles de post-traitement : température de couleur plus précise, effets plus visibles, et affichage numérique en temps réel sur les curseurs.

🆕 Nouveau 🔧 Amélioré ⚡ Performance
  • 🆕 Température couleur étendue de 3 positions (Cold/Balanced/Warm) à 5 positions (-2 / -1 / 0 / +1 / +2) pour un réglage plus fin
  • 🆕 Les curseurs Gamma et Saturation affichent désormais leur valeur numérique en temps réel (label bleu)
  • 🆕 La température couleur affiche aussi sa valeur dynamiquement (-2, -1, 0, +1, +2)
v3.9.70 Flux de travail & Aperçu colorisé

Refonte complète du flux de travail de l'onglet vidéo. Le pipeline de colorisation est structuré en trois étapes clairement étiquetées, et l'aperçu 8 secondes s'intègre directement au processus de colorisation.

🆕 Nouveau 🔧 Amélioré 🐛 Correction
  • 🆕 Bouton Preview 8 sec. colorisation — tester la colorisation sur 8 secondes avant de traiter la vidéo complète
  • 🆕 Bouton ↩ Reload Original Film — restaurer la vidéo originale après un aperçu
  • 🆕 Pipeline structuré en 3 sections : Pré-traitement / Post-traitement / Colorisation finale
  • 🆕 Bouton I'm Lucky déplacé dans la section Post-traitement pour plus de cohérence
v3.9.63 Système de test & Informations vidéo

Introduction d'un système de vidéo de test dédié et d'un affichage compact des informations vidéo. Les utilisateurs peuvent prévisualiser un court extrait avant de lancer une colorisation complète.

🆕 Nouveau 🔧 Amélioré
  • 🆕 Génération de vidéo de test : extraction et colorisation d'un clip de 8 secondes depuis n'importe quel point de départ
  • 🆕 Chemin de la vidéo originale conservé — toujours récupérable après un test
  • 🆕 Informations vidéo compactes : Résolution, FPS et Durée sur une seule ligne
v3.9.60 Restructuration du pipeline & Contrôle Gamma

Réorganisation majeure de l'onglet vidéo : le pipeline de traitement est désormais présenté dans l'ordre logique (Pré-traitement → Colorisation → Post-traitement). Le Gamma est déplacé dans le Pré-traitement, et un aperçu N&B en direct a été ajouté.

🆕 Nouveau 🔧 Amélioré ⚡ Performance
  • 🆕 Bouton Preview Pre-Processing — visualiser le résultat N&B optimisé avant colorisation
  • 🆕 Curseur Gamma déplacé dans le Pré-traitement — agit désormais indépendamment du toggle Restauration
v3.9.55 Température couleur & I'm Lucky

Introduction de deux contrôles de post-traitement majeurs : un curseur de température de couleur et la correction de hautes lumières I'm Lucky, conçue spécifiquement pour corriger le biais jaune typique de la colorisation IA.

🆕 Nouveau 🔧 Amélioré
  • 🆕 Curseur Color Temp. — ajuster les tonalités de froid à chaud
  • 🆕 Bouton I'm Lucky — correction sélective des hautes lumières en LAB, réduit le biais jaune/orange de DeOldify

🔭 Prochainement

  • Sauvegarde / chargement de préréglages Post-traitement
  • Module de suréchantillonnage Real-ESRGAN (module complémentaire séparé)
  • Traitement par lots de plusieurs fichiers vidéo
v3.9.77 Lizenz & Update-Benachrichtigungen AKTUELLE VERSION

Verbesserungen der Lizenzverwaltung und neues Update-Benachrichtigungssystem — in der Anwendung und im Launcher.

🐛 Fehlerbehebung 🆕 Neu
  • 🐛 Behoben: Trial-Ablauf-Popup erschien auch mit gültiger aktiver Lizenz
  • 🐛 Behoben: Launcher zeigte Grace-Period-Warnung (27 Tage) auch bei verfügbarem Internet
  • 🆕 Update-Benachrichtigung in RE Colorizer PRO
  • 🆕 Update-Benachrichtigung im Launcher — auf dem Lizenzbildschirm mit Link zur Changelog-Seite
v3.9.74 Unabhängige Gamma-Pipeline

Die Gamma-Korrektur ist jetzt ein vollständig unabhängiger Schritt in der Pipeline, der immer auf die S/W-Frames vor der Colorierung angewendet wird — unabhängig davon, ob Vor- oder Nachbearbeitung aktiviert ist.

🐛 Fehlerbehebung 🔧 Verbessert
  • 🐛 Behoben: Gamma wurde ignoriert, wenn die Vorverarbeitung deaktiviert war — wird jetzt immer angewendet, wenn Wert ≠ 1.0
v3.9.73 Verbesserte Farbsteuerung

Umfangreiche Verbesserungen der Nachbearbeitungssteuerung: präzisere Farbtemperatur, stärkere visuelle Effekte und Echtzeit-Zahlenwerte direkt an den Reglern.

🆕 Neu 🔧 Verbessert ⚡ Leistung
  • 🆕 Farbtemperatur von 3 Stufen (Kalt/Neutral/Warm) auf 5 Stufen (-2 / -1 / 0 / +1 / +2) erweitert
  • 🆕 Gamma- und Sättigungsregler zeigen jetzt ihren Zahlenwert in Echtzeit (blauer Label)
  • 🆕 Farbtemperatur zeigt ebenfalls den aktuellen Wert dynamisch an
v3.9.70 Workflow-Optimierung & Vorschau

Vollständige Überarbeitung des Video-Tab-Workflows. Die Colorierungspipeline ist jetzt in drei klar beschrifteten Schritten strukturiert, und die 8-Sekunden-Vorschau ist direkt in den Colorierungsprozess integriert.

🆕 Neu 🔧 Verbessert 🐛 Fehlerbehebung
  • 🆕 Schaltfläche Preview 8 sec. colorisation — Colorierung an 8 Sekunden testen, bevor das gesamte Video verarbeitet wird
  • 🆕 Schaltfläche ↩ Reload Original Film — Originalvideo nach einer Vorschau wiederherstellen
  • 🆕 Pipeline in 3 Abschnitte unterteilt: Vorverarbeitung / Nachbearbeitung / Endgültige Colorierung
v3.9.63 Testsystem & Videoinformationen

Einführung eines dedizierten Testvideoystems und einer kompakten Videoinformationsanzeige.

🆕 Neu 🔧 Verbessert
  • 🆕 Testvideoerstellung: 8-Sekunden-Clip von jedem Startpunkt extrahieren und colorieren
  • 🆕 Originaler Videopfad gespeichert — nach einem Test immer wiederherstellbar
  • 🆕 Kompakte Videoinformationen: Auflösung, FPS und Dauer in einer Zeile
v3.9.60 Pipeline-Neustrukturierung & Gamma-Kontrolle

Umfangreiche Neuorganisation des Video-Tabs: Die Verarbeitungspipeline wird jetzt in logischer Reihenfolge präsentiert. Gamma-Korrektur in die Vorverarbeitung verschoben, Live-SW-Vorschau hinzugefügt.

🆕 Neu 🔧 Verbessert ⚡ Leistung
  • 🆕 Schaltfläche Preview Pre-Processing — SW-optimiertes Ergebnis vor der Colorierung anzeigen
  • 🆕 Gamma-Regler in die Vorverarbeitung verschoben — wirkt jetzt unabhängig vom Restaurierungs-Schalter
v3.9.55 Farbtemperatur & I'm Lucky

Einführung von zwei wichtigen Nachbearbeitungssteuerungen: einem Farbtemperaturregler und der I'm Lucky-Lichterkorrektur, speziell entwickelt zur Behebung des gelben Farbstich-Problems bei der KI-Colorierung.

🆕 Neu 🔧 Verbessert
  • 🆕 Regler Color Temp. — Farbtöne von kalt bis warm anpassen
  • 🆕 Schaltfläche I'm Lucky — selektive LAB-Lichterkorrektur, reduziert Gelb-/Orangestich von DeOldify
  • 🆕 Old Film-Profil: integrierter Warnhinweis (kein Popup, kein Layout-Versatz)

🔭 Demnächst

  • Voreinstellungen speichern/laden für Nachbearbeitungseinstellungen
  • Real-ESRGAN-Hochskalierungsmodul (separates Add-on)
  • Stapelverarbeitung für mehrere Videodateien